5 Reasons You to Choose Metal Brazing for Your Application

There are different ways to join metal or aluminum structures. Here are a few reasons metal brazing might be the right one for your application:

You have small parts

Brazing is typically used for small elements, says Metal Web News. You’ll have to heat a broad surface if you wish to bring the filler material to its flow point. You’ll end up wasting a lot of material if you do that with large pieces.

You have thick metal sections

Broader heat along with lower temperatures make it easy to join these sections without worrying that the results will be warped or distorted. That makes brazing the best option to go for. If you have thin sections, the welding heat might burn through the material and damage it.

You’re working on joints

Brazing doesn’t require any manual tracing. In addition, the filler metal is attached by capillary action, which easily works on joints, regardless if they’re straight and tubular or even irregular.

You’re working with base metals

Brazing doesn’t melt one or both of the metals. However, this only works if the filler metal is metallurgically compatible with both base metals. Also, it has to have melting point that’s lower than both of the metals that is soon to be joined so keep that in mind if you’re thinking about whether it’s better to solder or braze the material.

You have a lot of joints to make

If you have a ton of joints to make for your unit assembly, then metal brazing makes for the ideal option. It’s easy and simple. It’s also quick as well as cost-effective when you resort to simple production methods. You won’t have to worry about joining methods that could slow down your production schedule or that cost an arm and a leg when you can simply go with brazing processes.

Share!

    Leave a Reply

    Your email address will not be published. Required fields are marked *